Phoenix Ice2 HV controllers incorporate the latest components, providing you with the reliability you expect from Castle Creations. All Ice controllers are ready to fly out of the bag, but users can tap into serious programming capabilities by connecting them to Castle Link software using a Castle Link* or Field Link programming card. 

Phoenix Ice2 HV controllers incorporate the latest components, providing you with the reliability you expect from Castle Creations. All Ice controllers are ready to fly out of the bag, but users can tap into serious programming capabilities by connecting them to Castle Link software using a Castle Link* or Field Link programming card. 

The Futaba CGY750 3-axis gyro features incredible performance due to its exceptional sensor design and its advanced/adaptive PID control algorithm. The new design provides a large, easy-to-read OLED display. Its basic and expert menus allow for quick set-up. Its cutting-edge MEMS (Micro Electro Mechanical System) sensor design, ultra high-speed processing speed and advanced PID control algorithm put it a quantum leap ahead of all other leading hold gyros in size, weight, and performance. The Futaba CGY750 has been optimized to work for flybarless helicopters.  

This Heavy Duty Futaba J-Series 1000mm Servo Extension goes between the receiver and the servo to make the wire longer. On one end of the wire is a male connector and on the other end of the wire is a female connector. Connectors slide snugly together to guard against vibrating loose. Heavy 20-gauge wire handles higher current loads with ease. 

The Futaba S9352 HV Digital Servo is designed to be used with RC models requiring especially high torque and high speed. It is able to deliver a maximum torque of 22Kg/cm at 0.06 sec/60°. Package includes 3-point horn, 3x8mm horn screw, four eyelets and two rubber grommets. 

It's the perfect tote for transporting the 3PK system with safety and style! Soft polyester cloth material lines the interior and antenna protector, and covers two foam blocks with Velcro® strips that can be re-positioned for a more secure fit. 

The Futaba R6202SBW Receiver has a two-port S.Bus system output and conventional system channel (2, 3ch) outputs. It can also be used with conventional system servos and S.Bus systems-compatible servos and gyros. It has selectable high or normal modes. Compatible with Futaba's FASST 2.4GHz (7ch/8ch/10ch/Multi-ch) systems. 

This lightweight and compact Futaba FR2F800 is a 6.6V 800mAh LiFe Battery designed for use in receivers.  

The Axion RC Alpha 139 is an ARF model suitable for both beginners and advanced pilots. It is constructed of shock resistant Flexpor material with brushless motor, ESC and servos all installed. Just plug in a receiver, grab your radio and you are ready to fly!  

The Axion RC Cumulus 200 is a 2m glider model designed for great fun and performance! It is ideal for both beginners and advanced pilots. Constructed with shock resistant Flexpor material, it has brushless motor, ESC and servos (for 3-axis control) pre-installed. Just plug in a receiver, grab your radio and you are ready to fly!  

Top-of-the-line Team Futaba radio cases! These Metal Transmitter Cases are as stylish as they are functional, with a brushed aluminum “champagne”-colored exterior and a Team Futaba logo.

 The Futaba 10CAP 10-Channel 2.4GHz is the radio system that offers the impossible: Pro-level features at a sport-system price.

Futaba SBC-1 Setting Tool is designed for setting channels to S.Bus servos and decoders of the Futaba S.Bus system. Built in LED indicator for setting configurations.

These are the electric air-brakes that sailplanes fans have been waiting for! The Topmodel Electric Speed Brakers are simply sensational! They are electrically driven, able to connect directly to the receiver and move proportionally. Gone were the days where air brakes have to be connected mechanically between wings into the fuselage, with linkages that might not be symmetrically connected and radio programming is needed to bring out symmetric and perfections in the air brakes system.

This Futaba Radio Bag is the perfect tote for transporting your radio system with safety and style! Top load design with well-padded interior. Made of durable, waterproof vinyl in black with the Futaba logo embroidered in red.

Futaba R6203SB is a 2.4GHz FASST S.Bus High-Speed 3-Channel Receiver notable for its small form factor at only 22 × 37 x 9mm in size and weighs only 7.2g! With its compatibility to the revolutionary Futaba S.Bus system, it can carry signals to as many channels as your transmitter can handle. So you can expect to see reduced wire clutter on your model.

The Futaba BLS255HV Brushless High Torque High Voltage Servo is a high performance standard size servo developed primarily for helicopter and airplane applications.

By connecting the Futaba CPS-1 Switch to a vacant channel on your receiver, you can now have high-density LED lights for your car, airplane wings or helicopter fuselage. LED lights ON/OFF is controllable via switch from transmitter. 

Latest!
The YS DZ175 Engine succeeds its predecessor DZ170 with increased capacity and power. It is developed for serious aerobatics competitions. This version is with mount and CDI Kit included. 

Latest!
The YS DZ175 Engine succeeds its predecessor DZ170 with increased capacity and power. It is developed for serious aerobatics competitions. 

3M VHB Heavy Duty Mounting Tape has high bonding strength that replaces liquid adhesives or mechanical fastener screws, rivets or welds. It is a 100% closed cells double coated acrylic tape that forms a tight seal against moisture, dirt and chemical.  It absorbs impact and vibration which is suitable for both indoor and outdoor use. Bonds to many surfaces such as metals, plastics, glass, foam board and more. 

Phoenix Ice2 HV controllers incorporate the latest components, providing you with the reliability you expect from Castle Creations. All Ice controllers are ready to fly out of the bag, but users can tap into serious programming capabilities by connecting them to Castle Link software using a Castle Link or Field Link programming card 

3M Super 77 Multipurpose Spray Adhesive is a high tack and fast drying mist spray adhesive. It bonds quickly in just 15 seconds. Securely bonds many lightweight materials such as attaching foils, carpeting, lightweight paper, cardboard, felt, and cloth to painted or unpainted metals, wood. 

3M Filament Tartan Tape is a glass filament reinforced tape for light duty strapping, bundling and reinforcing. It has a synthetic rubber resin adhesive with good adhesion to most fiberboard surfaces, and a variety of plastics and metal surfaces. 

Whether you’re into Electric Model Planes, Helis, Cars, Boats or other models, you need to know how your electric power system performs under actual operating conditions. The Eagle Tree e-Logger V4 is the product you need to monitor your LiPo, A123 or any other electric power system. Now the Eagle Tree e-Logger V4 comes in a heavy duty that logs pack current up to 150A! 

The Eagle Tree Altimeter Microsensor is a precision instrument that uses barometric pressure to measure altitude, just as full sized planes do. Advanced temperature compensation and factory calibration ensure the best possible accuracy, with no user calibration required. When used standalone, the Altimeter displays your maximum altitude on the built-in 7 segment LED display. 

The K&S 2806 Metal Hand Pump is designed for durability and large supply capability. The main component is machined from duralumin, and the drive shaft is made from heat-treated polished stainless steel. It is using a special O-ring (Perfluor) for outstanding durability.