Alfa Model Lavochkin LA-7 ARF

• It is almost finished, you only have to apply decals, install the propulsion unit and the RC equipment. You can utilise the kit’s box as the transport and storage container for the finished model.

• The scale model is moulded from the extruded polystyrene foam (EPSF) with a tougher surface layer, making the model more resistant to surface damage. Added to that all exposed surfaces are reinforced with plastic covers. Thanks to the ratio of the all-up weight and of the strength of the material used the model is quite compact, this feature reducing substantially the danger of damage in normal operation.

• When designing this model a maximum attention was devoted to its aerodynamic layout (e.g. the semi-symmetrical wing section, the symmetrical horizontal tail section), ensuring high aerodynamic finesse, with the resulting wide band of operational speeds and docile flying characteristics typical for large models.

• The range of proven power units offered enables to build a scale model of flight performance corresponding with that of the best slow flyers, as well as with the fully aerobatic models.

•To control the model you need the RC equipment suitable for controlling the slow-flyers - it would enable you to fly majority of the aerobatic figures (with the possible exception of those that require the rudder control).