FUTABA MPDX-1 Multi-Proportional System Decoder

• Plug the MPDX-1 into one channel of a Futaba PCM G3, PCM 1024, FM or R6014HS FASST receiver and get eight in return! (note: the MPDX-1 must be used with channel 11 or 12 when used with the R6014HS receiver)
• All seven of the added channels are fully proportional, switch selectable - and all feature endpoint adjustment (ATV) and fail-safe!
• Servo speed for each channel can be set
• Easy to set up
• Use two MPDX-1 units with the R6014HS or R5114DPS and gain 14 additional channels!
• Works with the following transmitters: 14MZ, FX40, 12Z, 12FG (note: the 12FG requires firmware update 1.3 or greater)

Specifications: 

Weight: 14.2g
Dimensions: 29.6x39.3x15.8mm
Operation power requirement: 4.8 or 6.0V (4~5 NiCd batteries)
Current drain: 7.5mA
Number of multi-prop output channels: 8
Applicable modulation modes: PCM-G3, PCM1024, PPM
Multiplexing scheme: Pulse width division (PCM-G3, PCM1024), time division (PPM)
Delay function: Programmable for each channel
Fail-safe function: F/S function/HOLD function can be selected for each channel.

Note: Requires a 4.8V or 6.0V battery and switch.