USD
Futaba S3171SB S.Bus/Programmable Servo
SGD 70.40
The Futaba S3171SB is a programmable slim digital servo compatible with the Futaba S.Bus System. It has dual built-in ball bearings.
The Futaba S3171SB is a programmable slim digital servo compatible with the Futaba S.Bus System. It has dual built-in ball bearings.
Specifications:
| Speed: | 0.24 sec/60 degrees at 4.8V |
| Torque: | 3.7kg.cm at 4.8V |
| Size: | 30 x 10.8 x 29 mm |
| Weight: | 20.5 g |
What is S.Bus?
Different from conventional radio control systems the Futaba S.Bus System uses data communication to transmit control signals from a receiver to a servo, gyro, or other S.Bus compatible device. This data includes commands such as "move the channel 3 servo to 15 degrees, move the channel 5 servo to 30 degrees" to multiple devices. The S.Bus devices execute only those commands for their own set channel. For this reason, it can be used by connecting multiple servos to the same signal line.
Different from conventional radio control systems the Futaba S.Bus System uses data communication to transmit control signals from a receiver to a servo, gyro, or other S.Bus compatible device. This data includes commands such as "move the channel 3 servo to 15 degrees, move the channel 5 servo to 30 degrees" to multiple devices. The S.Bus devices execute only those commands for their own set channel. For this reason, it can be used by connecting multiple servos to the same signal line.
Click to check out these videos to learn more about how the S-Bus system works!
| Weight: | 0.0700 |