MGM TMM 12032-3s Z-SERIES ESC

Z-SERIES TMM speedcontrollers such as the 12032-3 Z-series can be connected with a measuring device-Black Box Module that will measure the important information during flight. This allows the user not only to optimise the power unit but also to
determine mutual dependencies such as dependence of current on propeller, efficiency of drive on propeller, efficiency of
timing, real power consumption of drive and power consumption.

Specifications of TMM 12032-3 Z-SERIES:

Features of TMM Controllers:

• Perfect masking of signal interference and losses
• Extremely fine throttle steps (1023 steps)
• Very soft starts
• Motor and controller overload protection
• Built-in protection and management of Lipo/Lion and Nicad/Nimh batteries
• Data measured in operation of the speedcontroller (obtained using PC) (Optional cable and USBCOM required)
• Easy programming of speedcontroller using transmitter, UNICARD card or using PC (Optional cable and USBCOM required)

TMM speedcontrollers are also protected in the following ways:

1.Automatic Current Fuse (ACF) reduces the possibility of current overload from damaging the speedcontroller
2.Intelligent Power Reduce (IPR) system reduces the over-discharge of cells through measurement of voltage, current,
speedcontroller and battery condition
3.IPR system also enables retaining defined energy for BEC in the speedcontroller preventing battery from being
completely drained during operation (and avoid crashes due to loss of signal from the receiver) - only in speedcontroller
wtih BEC
4.Automatic Current Reduce (ACR)
5.Thermal fuse protects the speedcontroller up to 90 degrees C

Check out:

USBCOM+ PC Interface Module - For connecting ESC, Balancing Charger of Blackbox to PC

CC_02 - Service Connecting Cable

UNICARD - Programming card for MGM TMM speedcontroller for brushless motor