USD
PILOT 12158 Lavender
The Lavender is quite a simple kit to begin with. It is fun and can get addictive in the building process. Even more so when you take it to the skies.
There is quite a run up of balsa kits models from OK Models which one can get their hands on after the Lavender. There is the Caraway, Nutmeg 2, Pimenta, Cilantro, Cresson and several more. Check them out!
Lavender is a glider kit with wingspan of 1240mm. It is a high-performance small glider made up of a laser-cut balsa kit.
The kit is composed of the processed balsa wood and veneers. The parts are cut with high precision laser. It comes complete with the piano wire for the linkage, the guide pipe, included for the control horn.
Specifications:
| Total fuselage length | 798Mm |
| Full wingspan | 1240mm |
| Wing area | 18.7Dm2 |
| Flight weight | 240 ~ 270 g |
| Control | RD, EV, ESC |
Package Includes:
Laser cut processed wood material
Barca Planck material
Veneer-party control horn
Linkage for piano wire
Push rod guide pipe
Drawings
The additional equipment (sold separately):
Aircraft radio transmitter
Mini receiver
Two servo Tahmazo TS-1036 (48651)
Apollo V-1150 set 7x4.5 motor (48761)
The speed controller Pro.C-15 (48826)
Battery tomaso LP-2S1P600RE (48860)
Connector PILOT BEC connector (47525)
Lipo-charger (48,451)
For a covering film
Lamination for ironing
Film for HD gun (47404)
Instant adhesive
OK bond HW (43010)
FX (43451)
Epoxy adhesive (30-curing type)
Balsacanna (47875)
Sanding blocks (25042)
Sandpaper
And other common tools (cutters, drivers, etc.)
| Weight: | 0.9600 |