USD
Precision Aerobatics Extra MX Airframe Only (Yellow)
SGD 426.09
Own the 58” Precision Aerobatics FiberFusion® Extra MX today – Beyond the MAX!
With its fully air-foiled control surfaces, the Precision Aerobatics Extra MX delivers both exciting high speed precision and tumbling as well as some of the best slow speed and 3D controllability available. If you want to practice precision or IMAC flying the Extra MX has the feel of a much larger aircraft. As far as rudder works goes whether it is tight Control Line Turns, Knife-Edge Snakes or just plain old Slips to landing, the Extra MX does them and does them smoothly. No mixing required, just kick out the rudder when you want it and the MX responds the way it should.
If you want to work on landings and basic aerobatics, the MX has a lighter wing loading and better flight characteristics than most “sport” planes. However, where this plane really kills competition is in no-holds–barred 3D madness! If you want to do Harrier Rollers, Waterfalls, eye-popping Knife-Edge Spins or jaw-dropping Tumbles, then you will want to get your hands on one of these!
For maximum aerodynamics, the aileron design and construction of this model is exceptional, made in such a way that the hinge gap is completely sealed. This is quite complex to produce: the ailerons fit into the wing trailing edge tunnels and are glued and pre-aligned in the factory. Despite the laborious production of this design, we decided to produce the ailerons this way, as it allows perfect aerodynamic flow over the airfoil and results in maximum efficiency of the control surfaces.
Needless to say, the Extra MX is built using finest grade material, all cut by state-of-the-art laser and CNC machines. As any other PA model here too the two wings are removable with a CF wing tube and a CF sleeve which make the Extra MX a compact, durable, and easily transportable model.
In order to attain uniform performance for each and every model produced, we produce the planes on highly precise jigs. Each set of wings are matched individually to each fuselage (this is something most factories don’t do even in giant scales production). We assemble each airframe before shipping to ensure wing incidence, alignment and fit. All you need to do is bolt on the wings. The ailerons (as well as the stab/elevators) are already pre-hinged with the gaps sealed.
Features:
- Wings and ailerons are pre hinged and sealed!
- Anti rotation pins are pre glued
- The pre cut cowling is made of fiberglass and is reinforced with carbon fiber. Its aerodynamic design allows air to flow in and cool the motor, batteries and ESC for maximum setup efficiency. Two air scoops are also included in the kit.
- Prefabricated tinted canopy and hatch is one unit attached to the model with very strong magnets.
- The stiff CF landing gear is pre drilled and blind nuts are pre-installed in the fuselage for quick installation.
- Pre glued motor box has the correct thrust line already built in and the firewall is pre-drilled ready for an outrunner installation.
- German made ball links and CNC machined clevises included
Specifications:
- Wingspan: 1,472mm / 58 in
- Length: 1316.5mm / 51.83 in
- Flying weight (including batteries): approx 1750g / 61.7oz /3.85lb
- Wing area: 721 sq inch
- Wing loading: 12oz/sq.ft
Required to complete package:
- Motor: PA Thrust 50 brushless outrunner
- ESC: PA Quantum 65A ESC
- Propeller Adaptor
- Lipo pack: 2 x 3S 20-40C 2,200mAh 11.1V LiPo Packs
- Propeller: Vox 15 x 6 Prop
Reviews available in the following links:
| Weight: | 2.2000 |