Smart Fly SuperSwitch with Universal Charge Jack (2 in a Pack)

The Smart Fly SuperSwitch is a DSC style switch designed for the demands of large scale aircraft. The standard switches with their 22 gauge wires are just not sufficient for 1/3 scale aircraft up. Even with dual receivers in the 40% and larger planes the current draw from the battery through the switch can be substantial during maneuvers. We have measured a digital servo, unloaded, drawing 0.6 Amp when kept in continuous motion. Image what the same servo is drawing under load and then multiply that by the six to eleven servos you have in the plane. While this may be momentary this is when you need the least voltage drop to the servo as voltage supplies the servos’ torque. Reduce the voltage the servo sees and you reduce the torque the servo can supply. 

Smart Fly SuperSwitch with Universal Charge Jack 2 Pack  is a DSC switch with 18ga input and dual 22ga outputs, universal charge jack, 2-pack.

Features: 

• 18 Ga wire and "Deans" connector between battery & switch for ultra-low low voltage drop, enhanced current handling
• Dual 22 Gauge Leads To Receiver or Regulator
• Switch, Charge Jack In One Unit
• Supports DSC
• 12" "Deans" Extensions Available

2 pieces of shrink wraps are included for use with your batteries.