USD
Tahmazo Pro.C S45A ESC
SGD 58.90
Tahmazo Pro.C (S Series) Electronic Speed Controllers (ESCs) are designed with a highly efficient switching system.
Tahmazo Pro.C (S Series) Electronic Speed Controllers (ESCs) are designed with a highly efficient switching system. The built-in BEC (Battery Eliminator Circuit) allows the ESC’s battery to also supply power to the receiver and servos, eliminating the need for a separate battery to the receiver. The ESC can be used directly without the hassle of complex programming.
Designed with the latest technology, the ESC is built with the option to use brake (or not) with a flick of the throttle stick. It is best suited for modelers who want simplicity and ease of use.
Designed with the latest technology, the ESC is built with the option to use brake (or not) with a flick of the throttle stick. It is best suited for modelers who want simplicity and ease of use.
Product Features:
- Safety Switch
To prevent accidental start of a connected motor, a safety switch is incorporated in the ESC unit. This switch cuts the power supplied to the motor when not required.
- Safe Start Feature
This safety feature in the Tahmazo Pro.C ESC prevents the motor from running if the throttle stick is not at the lowest (OFF) position when the battery is first connected. It can help avoid any accidents that may occur with the sudden motor rotation.
- Low Voltage Cutoff Feature
The voltage will be cut off at 67 percent (of the initial voltage measured when the battery pack is connected) to prevent the motor from drawing current continuously from the battery. This feature helps prevent damage done to the battery. - BEC
The built-in BEC cuts down the voltage of 6V-17V (equivalent to 2 to 4-cell) Li-Po battery packs to output at 5V. Tahmazo Pro.C S-25, S-35 and S-45 are able to supply 2.5A continuous, whereas S-13 can supply 1.5A continuous.
Specifications:
| Operating Environment Temperature: Motor control: Control signal: User configuration parameters: Automatic configuration parameters: BEC: Maximum continuous current: Suitable for motor type: | 0 to 40° PWM8.5kHz 1.5 ± 0.5 micro-second Brakes On - Off (by default, has no brakes) Cut-off voltage (starting voltage using 67%) 5V switching scheme BEC 2.5A (S-13 max. continuous at 1.5A) Brushless motors |
| Weight: | 0.0500 |