• Home
  • V-Pro Tarragon 5m Wingspan Glider
main product photo

V-Pro Tarragon 5m Wingspan Glider

SGD 1,490.65

BACK IN STOCK 

The V-Pro Tarragon is an electric powered glider with a 5m wingspan. With its unique aerodynamics and unusually large wingspan, it has exceptional flight capabilities with agile maneuverability and excellent visibility.

The Tarragon's body is made of FRP reinforced with carbon Kevlar at strategic points, the surface area are painted white with gelcoat finish. Wings and tail are made of lightweight balsa with styrene core, layered with veneer and are film covered. The glider's landing can be well executed with built-in 440mm wide motorized spoilers.

Share this product
The V-Pro Tarragon is an electric powered glider with a 5m wingspan. With its unique aerodynamics and unusually large wingspan, it has exceptional flight capabilities with agile maneuverability and excellent visibility.

The Tarragon's body is made of FRP reinforced with carbon Kevlar at strategic points, the surface area are painted white with gelcoat finish. Wings and tail are made of lightweight balsa with styrene core, layered with veneer and are film covered. The glider's landing can be well executed with built-in 440mm wide motorized spoilers.
 
The Kevlar fuselage is gel coated with carbon foam core and balsa. Horizontal stabilizer has foam core, balsa and finished with film. Transparent plastic canopy, pilot figure, cockpit, linkage parts, stickers and manual are included. 
 
Foam core, balsa/plywood, wings are film finished. Wing struts are made of carbon. 

ncluded un package: 
- ELF Motorized Spoiler 440mm
- Tahmazo ER-413032d brushless motors (1200W, KV320)
· 45mm aluminum hub with a turbo spinner

Note: 18x9 folding prop blades (in picture) are not included.

Optional items (not included):

- Tahmazo On-board LiPo meter
- Tahmazo Multi Power Harness
- Switch harness
- Lipo Battery 3-Cell 1000mAh for receiver
 
 
Specifications:
  • Length (mm): 2135
  • Wing span width (mm): 4950
  • Wing area (dm2): 137
  • Gross Weight (g): 6800 ~ 7200
  • RC Mechanical 6servo + ESC + ELF Radio required 9ch or more


Required to fly (not included):

  • Radio for airplanes (min. 9 channels)
  • 1x thin servo for elevator
  • 5x standard servos (ailerons x2, flaps x2, rudder x1)
  • 18x9 folding prop blades
  • Gold Connectors (4.0BL)
  • Extension cords (700mm x2, 100mm x4)
  • 3-Cell (3200 or 4400mAh) LiPo x2 connected in series for motor
  • 60A ESC
The Tarragon has large wings with many control surfaces that requires power to drive multiple servos. In addition, there are motorized spoilers. Hence, modelers will be concerned about the lack of power supply. A stable power system ca be achieved by using the Tahmazo multi-power harness.
  1. Multi-Power Harness
    Tahmazo MultiPower Harness provides stable and consistent regulated power with lithium batteries for both 5V or 6V applications. Designed for use with scale airplanes supporting up to 10A continuous power.
  2. LiPo receiver battery (3-Cell 1000mAh)
  3. Power switch for multi-harness
  4. Onboard LiPo meter 

 

As the box is large, the shipping cost quoted with this order is only an estimate. Actual shipping cost will be advise via email. Apologies for any inconvenience.

Weight: 11.8000
V-Pro Tarragon 5m Wingspan Glider
YOUR RATING