11344 ANGELICA 2 3M DX

Description

Aircraft Specification:

• Length: 1415mm


• Wing Span: 3070mm


• Wing Area: 55.8dm2


• Weight: 1500-1600g


• Motor: Tahmazo CR-352010d (48853)


• RC Radio: AL(2), EV-RD, FL(2), ESC


• 3-piece main wing after assembly


• Difficulty of flight: For advanced users


• Aircraft completion state: Film pasted


• Compatible power unit: Electric motor

The narrow 98-degree V-tail, three-piece main wing, high aspect ratio three-stage dihedral angle, and distinctive two-stage tapered elliptical wing with an original wing shape combine to achieve both running and lift, resulting in a weight that can be called light for this class.

The fuselage is made of a combination of a fiberglass pod and a carbon tapered pipe to ensure light weight and strength. The main wing is made of a balsa rib assembly with a balsa full plank with a film finish, achieving rigidity and light weight. In addition, the 34mm aluminum turbo spinner designed for this aircraft reduces resistance around the slim nose.

The Angelica 2 comes in three types: Deluxe, Basic, and PnP with pre-installed mechanisms.

This DX type is a great value set that includes a CR-352010d brushless motor (3-cell LiPo) with an original covered rotor system as the power unit, a 34mm aluminum turbo spinner, and a premium RL12x6 carbon folding propeller.

Main Set Contents:

• Balsa rib assembly


• Balsa full plank, main wing finished with film applied


• Balsa tail finished with film applied


• Fiberglass pod


• Carbon tapered pipe


• Plastic canopy


• Plywood/fiberglass control horn


• Carbon rod for linkage


• Push rod guide pipe


• Carbon wing 

・Motor Tahmazo CR-352010d (48853)
・Folding propeller blade RL 12×6/8 carbon folding propeller blade (46956)
・Spinner hub set Tahmazo AT34/8C5.0ZM Spinner/hub set (48880)
・Japanese assembly instructions
・Color sticker

*This product is a film-pasted ARF finished model. To complete the model, you will need to attach the main wings and install the motor, radio receiver, servos, etc.
*Due to the material of the film, the covering film may sag or wrinkle. In such cases, you can apply heat with a model iron to shrink the film and remove it.
*The contents, design, color, etc. of the set may change without notice.