Description
The Bantam e-Station 902 is a high performance digital charger/discharger which has maximum output power of 200W. It can charge or discharge up to 32 cells of NiCd/NiMH and 10 series of Li-ion/poly batteries with maximum current of 10A. If more power is needed to discharge the battery at high voltage with high current, an optional external discharge module can be used together with the e-Station 902. The charger's firmware is upgradable via it's usb port.
Specifications:
For users' convenience, data can be stored for up to a maximum 10 sets data of different batteries. These data can be called out at any time you need without any hassle. It can perform 1 to 5 cycles of charge>discharge or discharge>charge continually to refeash and balance batteries. PC based analysis is available using USB communication ports on the charger. It reports with graphs for voltage, current, capacity and temperature curves.
Specifications:
Operating voltage range: | 10.0~18.0 Volt |
Current drain in no-load condition: | approx. 100mA |
Circuit capacity: | approx. 200W |
Charge current range: | 0.1~9.9A |
Discharge current range: | 0.1~9.9A |
Number of cycle charge/discharge: | 1~5times |
Battery data storage: | Up to 10 data |
NiCd/NiMH battery cell count: | 1~32cell |
Li-Ion/Polymer cell count: | 1~12series |
Pb battery voltage: | 6, 12, 24V |
Weight: | 1000g |
Dimensions: | 160 x 148 x 60mm |
Reviews
There are no reviews yet.