Jeti Model ADVANCE 70 Plus Heli ESC

Jeti Model ADVANCE 70 Plus Heli Electric Speed Controllers are designed to include many features and at the same time with the ease of programming (with the included Jeti Model ADVANCE Plus Programming Card).

 

Basic programming of Advance PLUS ESC

Choosing Brake ON or OFF and Hard or Soft timing - can be done without the Programming Card. Detailed programming of the Jeti Advance PLUS is done by using this tiny 43 x 40 mm Programming Card that is only 3 mm thick. Carry it in your pocket or your field box -- it has ALL the advanced programming functions in it. Just move the jumper connectors to the value you select. With the Programming card you can program or select the following:

1.NiCad and NiMH or Lithium battery
2.Motor Cutoff Voltage
3.Hard or Soft Cutoff
4.Prop Brake On or Off
5.Timing: Low for normal motors, High for Outrunners
6.Throttle Response: Linear or Logarithmic

Features:

• Very smooth throttle response
• Superb operation with OUTRUNNER motors
• Automatic motor cutoff with automatic detection of the number and the type of battery cells
• Safety cutoff when using Lithium batteries that prevents accidental destruction of the Lithium battery due to over discharge
• High frequency brake with non linear hard or limited braking action
• Automatic self-calibrating when you turn on your transmitter
• Automatic motor cutoff when battery voltage is low
• 8 kHz switching rate
• These can be easily programmed to operate either normal brushless motors or to operate OUTRUNNER motors

Specifications:

Voltage range (Number of cells)	6-12 NiCd/NiMH 2-3 Li-Poly
Continuous current (A)	70 A
BEC/ # of servos	Yes/ 3-5
Brake	Yes
Dimensions (mm)	52 x 25 x 12 mm
Weight (g)	20 g, 38 g with full-lenght wires
Switching frequency	8 KHz
Voltage BEC (V)	5.5 V
Timing	2 Modes

Check out:

Jeti Model ADVANCE Plus Programming Card