PHOENIX MODEL Classic 46-55

Description

PHOENIX MODEL Classic 46-55

This is the almost-ready-to-fly. This plane is a well designed 40-46 size trainer for beginner pilots. It has sturdy all balsa/ply wood construction and is very stable in flight. You can fly this plane after 1-2 hours of installation. All the hardware are included (servo wire, fuel tank, wheel/landing gear, etc). You only need to separately purchase the nitro engine and radio system.

Features

– Designed for compatibility with both GP and EP flight
– Extremely lightweight laser-cut all-wood construction
– All hardware included

Specifications

– Wingspan: 1437mm (56.5in)
– Length: 1145mm (45 in)
– Flying weight: 2400-2700 gr
– Wing area: 35 dm2
– Wing loading: 79g/dm2
– Wing type: Naca airfoils
– Covering type: V-kote film
– Spinner size: Plastic 58mm (included)
– Radio: 4 channel minimum (not included)
– Servo: 5 standard servo: 2 aileron; 1 elevator; 1 rudder; 1 throttle (not included)
– Recommended receiver battery: 4.8-6V / 800-1200mAh NiMH (not included)
– Servo mount: 21mm x 42 mm
– Propeller: suit with your engine
– Engine: .40-.46 / 2-stroke (not included)
– Motor: brushless outrunner
– Experience level: Beginer
– Plane type: Trainer

RECOMMENDED MOTOR AND BATTERY SET UP

– Motor: RIMFIRE .46 (not included)
– Lipo cell: 4-6 cells / 4000-5000 mAh (not included)
– Esc: 50-60A (not included)