PHOENIX MODEL Tiger 3 61-91 15CC

Description

PHOENIX MODEL Tiger 3 61-91/15CC

The Tiger 60 is designed for beginners and intermediate-level pilots. Its semi-symmetrical wings, make it easy to fly at slow speeds. All wood construction. Factory pre-covered with beautiful color graphics. Pre-glued and pinned hinges on all control surfaces. All the hardware are included (servo wire, fuel tank, wheel/landing gear, etc). You only need to separately purchase the nitro engine and radio system.

Features

– Designed for compatibility with both GP and EP flight

– Extremely lightweight laser-cut all-wood construction

– All hardware included

Specifications

– Wingspan: 1800mm (70.8in)
– Length: 1605mm (63.2 in)
– Flying weight: 3700-4200 gr
– Wing area: 55.8 dm2
– Wing loading: 75g/dm2
– Wing type: Naca airfoils
– Covering type: V-kote film
– Spinner size: Plastic 70mm (included)
– Radio: 4 channel minimum (not included)
– Servo: 6 standard servo: 2 aileron; 2 elevator; 1 rudder; 1 throttle (not included)
– Recommended receiver battery: 4.8-6V / 800-1200mAh NiMH (not included)
– Servo mount: 21mm x 42 mm
– Propeller: suit with your engine
– Engine: .91 / 2-stroke plug engine; 15cc gas engine (not included)
– Motor: brushless out runner (not included)
– Experience level: Intermediate
– Plane type: Low wing sport

RECOMMENDED MOTOR AND BATTERY SET UP

– Motor: Rimfire.60 (not included)
– Lipo cell: 6 cells / 4000 – 5500mAh (not included)
– Esc: 60-100A (not included)