PHOENIX MODEL Sonic Low Wing MK2 GP/EP.25-.32 ARF Scale 1:10

Description

When you’ve mastered that ‘trainer’ you’ll need to move on, so look no further than the Sonic Low wing ! Not only is the Sonic an ideal second model, it has enough new challenges in terms of flight performance to suit sports modelers as well. It has sturdy all balsa/ply wood construction. You can fly this plane after 1-2 hours of installation. All the hardware are included (servo wire, fuel tank, wheel/landing gear, etc). You only need to separately purchase the nitro engine and radio system.

Features

– Designed for compatibility with both GP and EP flight
– Strong Light Weight Construction
– High-quality hardware package included

Specifications

– Wingspan: 1340mm (52.7in)
– Length: 1040mm (40.9 in)
– Flying weight: 1800-2000 gr
– Wing area: 27 dm2
– Wing loading: 79g/dm2
– Wing type: Naca airfoils
– Covering type: V-kote film
– Spinner size: Plastic 53mm (included)
– Radio: 4 channel minimum (not included)
– Servo: 5 standard servo: 2 aileron; 1 elevator; 1 rudder; 1 throttle (not included)
– Recommended receiver battery: 4.8-6V / 800-1200mAh NiMH (not included)
– Servo mount: 21mm x 42 mm
– Propeller: suit with your engine
– Engine: .25-.32 / 2-stroke (not included)
– Motor: brushless outrunner 1200W, 800 KV (not included)
– Experience level: Intermediate
– Plane type: Low wing sport

RECOMMENDED MOTOR AND BATTERY SET UP

– Motor: RIMFIRE .32 (not included)
– Lipo cell: 3cells / 2000-3000mAh (not included)
– Esc: 30-40A (not included)