USD
PIPERCH - BALSA KIT
Due to the revision of the Aviation Law, registration of unmanned aircraft with a flying weight of 100g or more is now mandatory.
This is the birth of the tailless glider "Piparch" weighing less than 100g.
Since it is a flying wing without a fuselage, there is an advantage in reducing weight.
Therefore, the wingspan is set to 1100mm. The wing area is also 9.4dm2.
Although the tailless aircraft may look unstable at first glance, it exhibits outstanding stability by setting the center of gravity precisely.
The servo is embedded with TS-D0602.
The winglets, which tend to be damaged during transportation, are also removable.
Please enjoy a light flight while observing manners, such as ridge soaring using the wind from the bank.
Some linkage parts are not included in the kit.
・For intermediate and advanced users
・Balsa assembly kit
・Glider
Aircraft specifications
Overall length 310mm
Overall width 1100mm
Wing area 9.4dm2
Flying weight 95-99g
Control ELV2
*This aircraft is a balsa assembly kit.
*The aircraft in the photo is an example of a kit assembled and finished with film.
*Many aspects of the construction require skill and experience.
*The flying weight varies greatly depending on the adhesive and amount used, the type of coating material, the installed mechanism, linkage parts, etc. If it weighs more than 100g, aircraft registration is mandatory.
- The contents, design, color, etc. of the set may be changed without notice.
