Description
MGM TMM 12032-3S RB Hydro Expert+ is ready to run immediately, without programming (if using Nixx cells). MGM TMM 12032-3S RB Hydro Expert+ boasts water cooling which ensures good operation in models without possibilities of air cooling. The waterproof protection increases safety of operation in humid environment. MGM TMM 12032-3S RB Hydro Expert+ works with all types of motors – outrunners as well as classic motors (rotor inside).
All parameters may be easily set (programmed):
-
Easily using transmitter without time limitations
-
Very clearly and simply using PC
-
Very easily using programming card UNICARD
-
Programming using ICS connector – no more programming using servocable and pulling it out from the receiver
-
Possibility to read out important data measured during flight using PC (powerful tool for optimal power settings)
-
Outstanding care and protection of Lipol/Lion cells (of extreme importance) as well as of NiCd/NiMH (the system eliminates the impact of inner resistance of cells and amplitude of current on the switching voltage)
-
Possibility to define residual energy for BEC (respectively switching off voltage)
-
Outstanding masking of interference and signal dropouts
-
Extremely fine throttle step (1024 values)
-
Outstanding soft starts
-
Controller overloading protection
-
Very powerful MEGA BEC for small controllers sup to 44A and 4 Lipol (12 Nixx) or extremely powerful switching S_BEC for controllers 60A, 80A, 120A, 160A and 224A / 2 – 6 Lipol (6-18 Nixx)
-
Possibility of setting BEC voltage 6V or 5V for both types of BEC
-
Safe controller switch on; prevents unexpected start
-
Signalization by diode and acoustically
Extremely small inner resistance of controllers due to:
-
Using the best switching FET transistors
-
Multilayer PCBs with extremely thick copper layer are used
-
Using 8kHz switching frequency with low inner resistance ensures very small losses in the controller
-
Version with switch is also available(safe connection)
Reviews
There are no reviews yet.