PHOENIX MODEL Classic 61-91 15CC

Description

PHOENIX MODEL Classic 61-91 15CC

This plane is a well designed for .91/15cc size trainer for beginner pilots. It has sturdy all balsa/ply wood construction and is very stable in flight. Bigger wing and bigger wing area helps give a more stable flight. 3 degree wing dihedral gives a good balance flight stability and agility. All the hardware are included (servo wire, fuel tank, wheel/landing gear, etc). You only need to seperately purchase the nitro engine and radio system, and can fly this plane after 1-2 hours of installation.

Features

– Designed for compatibility with both GP and EP flight
– Extremely lightweight laser-cut all-wood construction
– All hardware included

Specifications

– Wingspan: 1730mm (68.1 in)
– Length: 1371mm (53.9 in)
– Flying weight: 3500-4200 gr
– Wing area: 50.5 dm2
– Wing loading: 73g/dm2
– Wing type: Naca airfoils
– Covering type: V-kote film
– Spinner size: Plastic 58mm (included)
– Radio: 4 channel minimum (not included)
– Servo: 5 standard servo: 2 aileron; 1 elevator; 1 rudder; 1 throttle (not included)
– Recommended receiver battery: 4.8-6V / 800-1200mAh NiMH (not included)
– Servo mount: 21mm x 42 mm
– Propeller: suit with your engine
– Engine: .91/15cc / 2-stroke (not included)
– Motor: brushless out runner
– Experience level: Beginer
– Plane type: Trainer

RECOMMENDED MOTOR AND BATTERY SET UP

– Motor: Rimfire.60 (not included)
– Propeller: 15×6- 15×8 E APC (not included)
– Lipo cell: 6 cells / 4000 – 5500mAh (not included)
– Esc: 60-100A (not included)